|
IEEE 1394TE |
|
|
Two-Port CardBus Card is a two-port IEEE-1394 CardBus Adapter featuring Texas Instruments OHCI Compliant IEEE 1394 Host Controller and Texas Instrument's new 1394a 400Mbps PHY. Our Two-Port CardBus Card gives you the capability to connect FireWire multimedia/consumer devices to any CardBus compliant PowerBook or Notebook PC Cable Extension |
|
| Features: | |
|
Our Two-Port CardBus Card has a transfer rate of 100/200/400 Mb/s (Asynchronous and Isochronous data). It also features 32-bit CRC checking and allows Hot-pluggable connections to be made to a Notebook computer. Two-Port CardBus Cards feature the advantages of lower active and idle power consumption, Ultra low-power mode (which is less than 150 uA when no ports are active), and are fully 1394a compliant including extended TPbias mode to accommodate DV Camcorder hot-plug connectivity. |
|
| Specifications: | |
|
Standards: IEEE 1394.a and 1394-1995 OHCI Compliant Host Bus: Type II CardBus Host Interface protocol: 32bit Bus Master DMA Card Dimensions: 3.37 x 2.13 x 0.20 inches (8.56 x 5.4 x .5 cm) Weight: 0.30 lbs (0.14 kg) IEEE-1394 to PCI Chip: Texas Instruments OHCILynx (TSB12LV23) Chip PHY: TI. TSB41LV03A Device Interface: A 400-Mbps, 2-port, 3.3V PHY Host Bus Data Transfer Rate: Up to 133 MBytes/sec burst rate Expandability: Allows you to expand your computer connectivity to connect Digital Video camcorder, hard disk drives, printers, scanners and other FireWire/1394 audio/video devices including TV, VCR, DVD (may need device drives from device manufacturers). Power Input Range: 8V~40V, DC / 0.6W / max. 1.6A Card Connector: 15 pin PCMCIA header Operating System Support Windows 98 Second Edition, ME, 2000, XP. Mac OS 8.6 or higher using FireWire 2.2.2 or higher |
|
