|
LNA |
|
|
The LNA-100
PCMCIA Card gives the solution for LAN that allows You to connect to
any 10Mbps or 100Mbps Ethernet Device for IEEE 802.3 10Base-T &
IEEE 802.3u 100Base-TX. This product is a revision of LNA-100, the
change is only the physical layer. Others including Medium Access
Control (MAC) layer, driver software and higher layer software,
applications software and functions are all the same. This product
uses Level One company's PHY chip. This product is easy to install,
just simply sliding it into the PCMCIA slot in your notebook
computer. You‘ll discover and wonder the speed You have never
experienced. |
|
| Features: | |
|
-
16bit PCMCIA 10/100Mbps Ethernet PC card
- 10Mbps or 100Mbps speed auto negotiation -
Microsoft Plug & Play compatible -
Support "Hot Swap" card insertion and removal - Support Windows 95/98/ME/2000 and Linux drivers |
|
| Specifications: | |
|
-
PCMCIA Interface, comply with PCMCIA release 2.1 and JEIDA 4.x standards -
One external dangle cable with a RJ-45 interface to connect to Ethernet
Network -
Complies to IEEE 802.3 10Base-T and IEEE802.3u 100Base-TX standards -
Automatically negotiates 10 or 100Mbps connection rate, depending on speed
of the network -
Full duplex support for 10 and 100Mbps -
Cable requirement:
10Base-T : CAT3 / CAT5 UTP up to 100M/328ft
100Base-TX: CAT5 UTP up to 100M/328ft -Dimension:
PCMCIA type II, 85.6 x 54.0 x 5.0 mm (L x W x H) -EMC: FCC Part15 class B, CE(CISPR22 class B), VCCI Class 2 Environmental
Operating Ranges -Operating
: Temperature : 0 ~ 65°C
Humidity: 20 ~ 80% -Storage:
Temperature :- 20 ~ 90°C
Humidity: 10 ~ 90% -Max:
300mA / 5V LED
Indication -"10"
LED: indicates 10Mbps Ethernet is connected -"100"
LED: indicates 100Mbps Ethernet is connected -"ACT"
LED: indicates 10M or 100Mbps Ethernet is in active now. Drivers
support -
Windows 95, 98 -
Windows NT3.51, NT4.0 - Windows 2000 -
Windows ME - Windows XP -
Linux -
DOS / Novell ODI - Packet Driver |
|
